Installation Guide – Breizh-Trotter Child Bed

Official setup guide for the front cab suspended bed for campervans and converted vans.

⚠️ Important Safety Instructions

Always check the strength and rigidity of your anchor points before placing your child in the bed. Never exceed the recommended maximum load for your vehicle's setup. Make sure to push the steering wheel fully in before setup.

1. Cabin Preparation

⚙️ Adjustments

  1. Push steering wheel fully in: Use the adjustment wheel or lever under the steering column to push the wheel as far in as possible towards the dashboard.
  2. Adjust front seats: Move seats forward or backward and adjust backrest inclination to ensure a clear space.

🎯 Target Position

The bottom of the bed should be positioned 3 to 4 cm above the steering wheel. This ensures optimal stability without resting on the steering system.

2. Assembling Support Slats

🔧 Installation & Removal

Structural slats ensure rigid support at both ends of the bed.

  • Installation: Slide and engage slats firmly at both ends until the safety lugs lock in place.
  • Removal: Press down on the end of the slat to disengage the lug, then slide it out.

3. Choosing Anchor Points

The bed is suspended by 4 adjustable straps with heavy-duty hooks. The chosen anchor points determine the net inclination.

Seat belt anchor

1. Seat Belt Buckle (Recommended)

Priority option: Renault Trafic, Peugeot Expert, Citroën Jumpy, Fiat Ducato, Jumper, Boxer, Ford Transit...

Hook directly into the upper belt loop. Optimal stability.

Grab handle loop

2. Grab Handles

Recommended to tilt nets inward (toddlers) or when front seats are swivelled.

Loop method: Wrap strap around handle and hook onto itself to prevent friction.

Headrest posts

3. Headrest Posts

Essential for: VW T4, T5, T6, Mercedes Vito... where seat belts cannot be used.

Hook around front headrest posts.

Sun visor axles

4. Sun Visor Axles

Direct upper hook attachment.

• Ducato / Boxer / Jumper: Up to 100 kg.
• VW / Mercedes / Ford: Up to 50 kg.

Specific Sun Visor Adjustments

Renault Master attachment

Renault Master

Use the supplied D-ring at the sun visor attachment point.

Renault Trafic attachment

Renault Trafic

Attach using the supplied D-ring directly on the original mount.

Peg mount Expert Jumpy

Peugeot Expert / Citroën Jumpy

Upper mount on original axle. For children over 45 kg, a dedicated peg installation is required.

4. Full Installation Video Tutorial

💬 Questions or need setup assistance?

Our technical team is ready to help you choose the best setup for your van.